Repairs To Upvc Windows's History History Of Repairs To Upvc Windows
Repairs To Upvc Windows's History History Of Repairs To Upvc Windows
Blog Article
Repairs to uPVC Windows
uPVC is a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. They do not rot or rust like aluminum or timber.
It is important to clean and oil UPVC windows and doors regularly. This will prevent unnecessary repair costs as well as increase energy efficiency.
1. Broken Glass
If the glass in your window has been damaged, it could cause a large deal of damage to your home, which can make it very hazardous and possibly fatal. It is essential to take the time to make sure that you're doing all you can to ensure that your windows are in good repair.
For single pane windows, it is fairly easy to replace them, and the new window will generally fit within the old frame very easily. If you have double-paned windows which are held together by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this situation, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.
Wearing eye protection and heavy gloves is essential if you plan to remove the glass yourself. It is also a good idea to lay down a drop cloth before you begin working on the glass so that any shards fall on the fabric instead of onto the floor where they could be trampled upon and cause further damage.
It's a good idea to seal the gap after the glass has been removed. This will prevent drafts and water from entering your property until a professional arrives to repair the window. This also serves as an obstacle to stop criminals from getting into your home. If the gap is particularly large, you may want to consider using the security door with an integrated window, since it offers the best of both worlds.
2. Sagging
uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber windows made of sash. However, with time, they can suffer from a variety of issues like sagging. A sagging window in uPVC can cause problems with light, draughts, and even security. It's important to take action as soon as you notice your uPVC windows are sliding.
Repositioning the hinges can help fix a window that is sliding. To accomplish this, you'll need open the window so that you can access the frame. With a screwdriver, you can unscrew the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you've relocated your hinges. If you are happy with the size of the window, tighten the screws to secure them in place.
If you cannot reposition the hinges, you may have to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, which causes them to loosen. If this happens, it's essential to replace the seal as quickly as you can to ensure that your uPVC windows are waterproof and safe from drafts.
uPVC handles could also loosen. The majority of the time, this is caused by screws that have become loose over time. However, it can also happen because the handle mechanism has worn out. It's a good thing that it's simple to repair a loose uPVC window handle yourself. First, you'll need close the window and perform a test fit. The corners of the sash need to align with the casing joint. If it doesn't then you can use the screwdriver to loosen the handle. Then, you can turn the mechanism check here into position.
3. Water Leaks
If you're waking up to damp floors and mouldy walls each time it rains it is important that you take action. The leaks of water through windows could cause structural damage to your home, and hinder your ability to control the temperature in your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.
This is a simple fix that can be completed by anyone who is a DIYer with the skills. Based on the severity of the problem the caulking that was used up might need to be removed before a fresh layer is applied. It is important to keep in mind that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area more difficult to clean and could decrease the efficiency of your energy usage.
Make sure that the drainage holes are free of debris in them, and also that the sill pan has been properly angled to drain away from the window. In more serious situations, you might have to consider replacing the window.
Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and is able to quickly spread throughout the house.
It is also important to note that if the leakage originates from the glass of your double glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sagging. It is also possible to be fixed by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.
4. Faulty Hinges
If your uPVC windows are difficult to open, or slack and open in a breeze it could be the hinges that are at the fault. These are easily replaced by any competent DIYer and can usually be completed in just a few minutes.
Like any mechanical component hinges are prone to be damaged over time. It is an easy procedure, but it is easier to do when you have a person to help you hold the frame up.
Check that the uPVC hinges are open and closed in the proper direction. Look for the arrows that are on each hinge to determine which direction the window should be opened.
The problem can be caused either by opening the window incorrectly or by a poor installation at the factory. Sending us photos through our website can often resolve the problem. We are happy to provide advice.
Regularly lubricating the hinges is essential. This can be done by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. Ideally, you should do this at least once a year. WD40 and other solvent-based lubricants are not recommended as they could damage your uPVC windows.
5. Draughts
Draughts can be caused by different factors. The hinges may also become misaligned due to wear, causing an opening where the sash meets frame. This can be easily repaired by giving them a thorough clean, however when they're beyond repair, it may be necessary to get them re-aligned or replaced. The interlock may be unbalanced. This happens on the hinge side and might require to be cleaned. In some cases, it may be necessary to replace these.
These seals can wear down or get damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glasses. This will help to regulate indoor temperatures and lessen the risk of draughts.
Another, and most effective ways to reduce draughts is by using a draught excluder, these are typically made of fabric which are filled with a type of filler. They can be placed on the windowsill on top. They will keep your home warm by blocking out cold air.
Your windows made of upvc will continue to provide excellent insulation and security in your home with a little regular maintenance and repairs. It is crucial to keep in mind that all windows eventually wear out and it is cheaper to replace them than to repair them. If you encounter any issues with your Upvc window it is recommended to speak with an expert as soon as possible.